PROFESSIONAL GROWERS
can optimize Plantskydd by diluting each 2.2 lb. package in up to 6
gal. of water. Test using different dilution rates applied at different
frequencies - every 2-6 weeks depending on growth rates and level of
browse.
-
Wet container first to avoid powder sticking to sides. Pour powder
into mixing container.
-
Slowly stir equal parts of water into powder to make a
lumpless paste/slurry (an electric paint mixer paddle is ideal).
-
-
Pour solution through fine mesh filter or cheese cloth into pressure-type
sprayer.
SPRAYER: Use pressure-type — hand or backpack
sprayer. to visit our Sprayers page.
TREATMENT:
-
APPLY ON DRY PLANTS - rainfast
in 24 hours
-
For Deer & Elk - Dip/Spray mainly tops of plant —
until wet but not dripping.
-
For Rabbits - spray stem and lower leaves.
-
Ornamentals — spray mainly on leaves of plants until
wet - avoid blossoms.
-
-
Test sample plants to determine sensitivity.
-
Needles/leaves darken temporarily after treatment — original
color returns in 18-36 hours.
-
Apply at above freezing temperature.
-
Avoid application in direct hot sunlight — for best results,
apply in early morning or late afternoon.
-
Expect some reduction in efficacy in warmer/sunny climates.
-
Treating Pine seedlings during bud flush is not recommended (OK
before/after bud flush period).
-
Allow to dry 1-2 days before watering.
-
DO NOT apply directly onto edible parts of fruit, vegetables
and other food crops. Wash fruit and vegetables before eating.
-
If solution comes into contact with eyes or skin, wash/flush
with water.
-
Avoid spraying concrete and wood to avoid discoloration.
-
Rinse sprayer, gloves and planting equipment after use.
-
If sprayer clogs, rinse in hot water.
-
Use mixed solution within a few days.
 You
will require the plug
in to access this information.
|
